Water-cooling nema 23 stepper motor with aluminum block

0 comments

Water-cooling nema 23 stepper motor with aluminum block

Cooling any single face of the motor is fine. The motor case conducts heat very well. Many 3d printers effectively cool the motors merely by having the output drive face of the motor bolted to a metal bracket which is bolted to the aluminum extrusion frame. That's it. That contact alone cools the motor, which is shown by how the motors overheat when people install vibration dampers, which puts rubber between the motor and the extrusion.

The only thing I would worry about is the surface area inside this particular style of block, and ensuring that you use an all-aluminum radiator since the block is aluminum.

There is another type of cheap 40x40 aluminum block with the nipples on the face instead of on the edge. That style has fins and a lot of surface area inside. This style with the nipples on the edge has a big S channel inside and not much surface area. It may still be more than enough. I'm just saying it's a significant difference and it might make a difference. If you find you're not cooling enough, all you may need to do is switch to that other style of block, not try to install 3 blocks per motor or any other exotic nonsense.

But no way do you have to worry about coooling more than one face of the motor, nor does it matter rwhich face it is, especially not with active water cooling like this, as long as the block is actually making good thermal contact with the motor (thermal tape, or thermal epoxy, or thermal pad & zip ties)

Cloudray Stepper Motor Series has set the standard for quality, reliability, and durability in stepping motors. The precision of our Torque Power motors is matched only by the dependability of their performance. All Torque Power motors are bi-directional and totally enclosed with permanently lubricated ball bearings for long-lasting, smooth operation.

stepper motor for 3D printer stepper motor for carving machine
High Torque, High Precision and Long life is Cloudray's core advantage
Low vibration,Low heating, No loss of step
Fast Response,Better Acceleration Performance.
Thanks to a robust design they can be selected for the harshest environments. Precise, open-loop, speed and position control can be achieved with the application of full step, half step, or microstepping electronics.
stepper motor for 3D printer stepper motor for carving machine
Higher Resolution,AvoidaHnce of Resonance Regions
Stepping angle is adjustable( rang in 18°±5%), 0.9 °stepper motor's stepping angle is smaller, fineness is higher and positioning is more accurate.Avoiding vibration,runs more smoothly and gets lower noise.stepper motor for 3D printer stepper motor for carving machine
Sturdy structure, extremely long life
High quality materials including bearings and shaft made in Japan
Robust assembly, high speed range, and exceptional performance in even the harshest environments make Cloudray Stepper Motors the perfect solution for demanding positioning applications.
stepper motor for 3D printer stepper motor for carving machine
Short length and light weight allow them to be used in highly integrated systems
stepper motor for 3D printer stepper motor for carving machine  stepper motor for 3D printer stepper motor for carving machine  stepper motor for 3D printer stepper motor for carving machine  stepper motor for 3D printer stepper motor for carving machine
Cloudray stepper motor factory video
Stepper motor application
Cloudray stepper motor and Stepping Motor Driver are widely used in engraving machine, cutting plotter, textile machine, 3D printer, medical devices,stage lighting equipment, robot, CNC machine, music fountain and other industrial automatic equipment.
stepper motor for 3D printer stepper motor for carving machine
stepper motor for 3D printer stepper motor for carving machine  stepper motor for 3D printer stepper motor for carving machine

Leave a comment

All blog comments are checked prior to publishing
You have successfully subscribed!