Stepper motor for CR10-S5 Y-axis

0 comments

Stepper motor for CR10-S5 Y-axis

This is a NEMA 17 motor. It is virtually identical to the NEMA 17 motors Creality uses in most of their 12V products.

In contrast to other companies, Creality uses a different connector with a flat ribbon cable instead of color-coded wires.

The upper line of the label identifies it more clearly:

  • JD Identifies the factory/manufacturer
  • 42 identifies the faceplate size as 42mm square, so a NEMA17
  • HS identifies how the holes are shaped
  • 60 is the height of the motor as 60 mm.
  • 1500 identifies how much power is OK for it, here: 1500mA = 1.5A
  • A specifies our motor has a maximum safe temperature of 104°C
  • - gives us no voltage for this motor, but as you have a CR10, it should be 12V
  • 02F is supposed to tell us something about the wiring and steps per rotation, but I can't find out what.

Side Note: the Creality Ender3 uses 34mm high stepper motors.

 

Cloudray Stepper Motor Series has set the standard for quality, reliability, and durability in stepping motors. The precision of our Torque Power motors is matched only by the dependability of their performance. All Torque Power motors are bi-directional and totally enclosed with permanently lubricated ball bearings for long-lasting, smooth operation.

High Torque, High Precision and Long life is Cloudray's core advantages

 

                       Low vibration,Low heating, No loss of stepFast Response,
                                   Better Acceleration Performance.
   Thanks to a robust design they can be selected for the harshest environments. Precise, open-loop, speed and position control can be achieved with the application of full step, half step, or microstepping electronics.
                 Higher Resolution,Avoidance of Resonance Regions
Stepping angle is adjustable( rang in 18°±5%), 0.9 °stepper motor's stepping angle is smaller, fineness is higher and positioning is more accurate.Avoiding vibration,runs more smoothly and gets lower noise.

                            Sturdy structure, extremely long life
      High quality materials including bearings and shaft made in Japan
Robust assembly, high speed range, and exceptional performance in even the harshest environments make Cloudray Stepper Motors the perfect solution for demanding positioning applications.
Short length and light weight allow them to be used in highly integrated systems.

                                    

 Cloudray stepper motor factory video

Leave a comment

All blog comments are checked prior to publishing
You have successfully subscribed!