Is there any stepper motor with a step angle less than 1.8° for 3D printer?

0 comments
Is there any stepper motor with a step angle less than 1.8° for 3D printer?
1.8 degrees and 0.9 degrees are the most common step angles for steppers used in 3D printers. I’m using 0.9 degree steppers in my scratch-built printer.

0.45 degree steppers exist, but aren’t as readily available and cost more.

3.6 degree steppers also exist, but I don’t know why you’d want to use one.

Going to a smaller step angle will require your printer controller to generate a higher step pulse rate, which usually means having a faster processor. Which is why 8 bit controllers usually stick with 1.8 degree steppers, but more recent 32 bit controllers have no problem with 0.9 degree steppers.
Cloudray Stepper Motor Series has set the standard for quality, reliability, and durability in stepping motors. The precision of our Torque Power motors is matched only by the dependability of their performance. All Torque Power motors are bi-directional and totally enclosed with permanently lubricated ball bearings for long-lasting, smooth operation.
Cloudray stepper motor series are widely used in medical instruments, robotics, 3D printers, extruders, laser cutters, engraving machine, textile equipment, packaging machinery, CNC machines, etc. nema 23 bipolar stepper motor for 3D printer and CNC
 
High Torque, High Precision and Long life is Cloudray's core advantages
Low vibration,Low heating, No loss of step
Fast Response,Better Acceleration Performance
Thanks to a robust design they can be selected for the harshest environments. Precise, open-loop, speed and position control can be achieved with the application of full step, half step, or microstepping electronics.
nema 23 bipolar stepper motor for 3D printer and CNC
Higher Resolution,Avoidance of Resonance Regions
Stepping angle is adjustable( rang in 18°±5%), 0.9 °stepper motor's stepping angle is smaller, fineness is higher and positioning is more accurate.Avoiding vibration,runs more smoothly and gets lower noise.
nema 23 bipolar stepper motor for 3D printer and CNC
Sturdy structure, extremely long life
High quality materials including bearings and shaft made in Japan
Robust assembly, high speed range, and exceptional performance in even the harshest environments make Cloudray Stepper Motors the perfect solution for demanding positioning applications.
nema 23 bipolar stepper motor for 3D printer and CNC
Short length and light weight allow them to be used in highly integrated systems
nema 23 bipolar stepper motor for 3D printer and CNCnema 23 bipolar stepper motor for 3D printer and CNCnema 23 bipolar stepper motor for 3D printer and CNC
Cloudray stepper motor factory video
Stepper motor application
Cloudray stepper motor and Stepping Motor Driver are widely used in engraving machine, cutting plotter, textile machine, 3D printer, medical devices,stage lighting equipment, robot, CNC machine, music fountain and other industrial automatic equipment.
nema 23 bipolar stepper motor for 3D printer and CNC
nema 23 bipolar stepper motor for 3D printer and CNC
nema 23 bipolar stepper motor for 3D printer and CNC

Leave a comment

All blog comments are checked prior to publishing
You have successfully subscribed!