How do I control a stepper motor with an L298N driver and LabVIEW?

0 comments
How do I control a stepper motor with an L298N driver and LabVIEW?
Stepper Motor’s current draw is usually quite high so make sure if it is within the L298N supported limit. For this see the data sheet, I don’t remember at the moment but I do remember burning the L298N while trying to drive stepper motor through it. LabVIEW alone can not drive it, you need some hardware and the coding would depend on the hardware you’re using. If you’re using NI DAQ device, there’re DAQmx Express VIs to start with and numerous examples too shipped with the NI DAQ module for LabVIEW.
Cloudray Stepper Motor Series has set the standard for quality, reliability, and durability in stepping motors. The precision of our Torque Power motors is matched only by the dependability of their performance. All Torque Power motors are bi-directional and totally enclosed with permanently lubricated ball bearings for long-lasting, smooth operation.
4 Axis Nema 34 Stepper Motor

High Torque, High Precision and Long life is Cloudray's core advantage

 

Low vibration,Low heating, No loss of step
Fast Response,Better Acceleration Performance
Thanks to a robust design they can be selected for the harshest environments. Precise, open-loop, speed and position control can be achieved with the application of full step, half step, or microstepping electronics.
4 Axis Nema 34 Stepper Motor
Higher Resolution,Avoidance of Resonance Regions
Stepping angle is adjustable( rang in 18°±5%), 0.9 °stepper motor's stepping angle is smaller, fineness is higher and positioning is more accurate.Avoiding vibration,runs more smoothly and gets lower noise.
4 Axis Nema 34 Stepper Motor
Sturdy structure, extremely long life
High quality materials including bearings and shaft made in Japan
Robust assembly, high speed range, and exceptional performance in even the harshest environments make Cloudray Stepper Motors the perfect solution for demanding positioning applications.
4 Axis Nema 34 Stepper Motor

Short length and light weight allow them to be used in highly integrated systems

4 Axis Nema 34 Stepper Motor
4 Axis Nema 34 Stepper Motor
4 Axis Nema 34 Stepper Motor
4 Axis Nema 34 Stepper Motor
Stepper motor application
Cloudray stepper motor and Stepping Motor Driver are widely used in engraving machine, cutting plotter, textile machine, 3D printer, medical devices,stage lighting equipment, robot, CNC machine, music fountain and other industrial automatic equipment.
4 Axis Nema 34 Stepper Motor
4 Axis Nema 34 Stepper Motor
4 Axis Nema 34 Stepper Motor

Leave a comment

All blog comments are checked prior to publishing
You have successfully subscribed!